Sunday, September 30, 2012

Solar Panel Set

The solar panel was set this afternoon. I was too busy and forgot to take pictures. The panel is very heavy. For the next panels, I will change the design to make it lighter, using 1x cedar instead of 2x pine for the frame, 1/2 inch plywood for the backing, or remove the plywood and replace it with narrow cedar planks under the pex pipes, the end of the aluminum heat spreaders will not be backed, which should be OK.

I still have to connect the panel to the hot tub.

1 comment:

  1. You might qualify for a new solar rebate program.
    Find out if you're qualified now!

    ReplyDelete